360-systems DigiCart/EX Manual do Utilizador

Owner’s Manual

WARRANTY AND REPAIR POLICY The DigiCart/EX recorder is warranted against defects in material and workmanship for a period of one year from date of or

Click the Services for Network File System check box. Click Next. Click Install in the Confirm Installation Selections screen. After installation,

Go into Share and Storage Management (Start>Administrative Tools>Share and Storage Management). Select Edit NFS Configuration. The first s

Select Do not use an identity mapping solution, then click Next. Review the setting and click Configure. Confirm by clicking Close. 90 • Networkin

Next, select Use Services for NFS to Share Folders and click on Provision a Shared Folder Wizard. Click the Browse button to select an existing

In the NTFS Permissions screen, click Edit Permissions. Click Other Users or Groups. Click Object Types and set to Group or B

Click OK, then Next in the NTFS Permissions screen. Select NFS by clicking the check box. Edit the Share name if necessary to include

Select Enable unmapped user access and Allow anonymous access. Click Edit Permissions. Select Full control. A dialog will ap

Select ALL MACHINES and click Edit: Select Read-Write in Permissions. Check Allow root access. Click OK then Next. Networking • 95

The settings are displayed for review. Click Create. Click Close, or click Shared Folder Location and repeat these instructions from the note on

Creating Net Drives in Windows Explorer You can also create Net Drives directly in Windows Explorer: Open Windows Explorer (Start> Programs (or

TRADEMARKS The following trademarks may appear in this manual:  is a registered trademark of 360 Systems.  DigiCart® and Instant Replay® are re

Select Share this folder by clicking on the check box. Select both Kerberos options and No server authentication if necessary. Select Allow a

Configuring Windows with Hanewin NFS Server Windows 7 does not have any option for native NFS service, but there is a package available from Hanew

Select the Exports tab and click on Edit exports file. A file will appear with the first four example lines. These lines are for example and are

Go to the DigiCart/EX. Follow the directions on mounting a Network Drive. Configuring Windows Firewall for Hanewin As the system is designed for us

Managing Net Drives on the DigiCart/EX MOUNT NETWORK DRIVE DigiCart/EX can attach to up to four network drives at a time. It can be helpful to thi

Networking • 103 Troubleshooting Network Drive Errors If a connection to the network cannot be established (network connection is broken; networ

Index 24 Bit Digital Data ...78 AC-2 ...1, 4, 25, 39, 70, 80 record setup ...25 Adjust Record Levels

17BIndex • 105 Mapping Hot Keys ...30 Network Drive ... 17, 37 Memory Card formatting ...

viii • Notices WARNING SYMBOLS THE FOLLOWING WARNING SYMBOLS ARE USED ON THE PRODUCT IN THIS MANUAL: ENGLISH ATTENTION: REFER TO OWNER’S MANUA

Overview Introduction to the DigiCart Recorder As the 1980s came to a close, the promise of high-quality digital audio became a reality with the in

What’s New in DigiCart/EX DigiCart/EX is the most advanced hard disk/cart system in the broadcast industry. Building on the proven design of the ind

Supported File Formats DigiCart/EX normally records audio in WAV format. Previous DigiCart models used a proprietary recording format. To ensure

Storage Capability Storage time on DigiCart/EX drives will vary depending upon the sampling rate and recording format used. The table below shows ap

0BOverview • 5 Programmable Hot Keys play back cuts with single-keystroke speed. Once the Hot Keys are assigned, they will remain in memory eve

Chapter 1 Installation Mounting DigiCart/EX may be used on a tabletop or mounted in a 2U, 19” equipment rack. Rack mounting ears are provided as par

POWER WARNING CONNECT ONLY TO A GROUNDED 50/60 HZ AC OUTLET PROVIDING THE CORRECT VOLTAGE (115 VAC OR 230 VAC, AS DELIVERED). DO NOT REMOVE OR DE

(Inside front cover – intentionally blank)

8 • 23BInstallation GPI/O Connector TRANSPORT CONTROLS The PLAY, STOP, RECORD, PAUSE and LOOP remote control inputs are optically isolated from

Chapter 2 Control Panel SD MEMORY CARD X LCD Display DigiCart/EX employs a graphics LCD with backlight as it’s main display. The display is gener

Miscellaneous EXT SYNC illuminates to indicate that sync source is set to an external reference in the Setup menu. The LED blinks if there is no val

Buttons NAVIGATION ARROWS The NAVIGATION ARROW buttons are used to: • Navigate between drive, directory and cut levels • Select from different va

UTILITY BUTTON The UTILITY button is used to access functions such as Hot Key assignments, copy, rename, delete, and disk format operations. Use the

VIEW LIST BUTTON The VIEW LIST button will immediately display the contents of a Quickstack or Playlist. VIEW LIST is a toggle button that illumin

Memory Card Reader The Memory Card Reader allows the use of SD memory cards for audio storage. The Card Reader appears in the system as a Drive at I

24BControl Panel • 15 APPROVED MEMORY CARDS The following memory cards have been tested and are known to work with DigiCart/EX. • Kingston Ul

Chapter 3 File Organization and Navigation Overview of Drive and Directory Structure DigiCart/EX retains the same drive and directory structure as pr

Files may be accessed by name or by file ID number. The key to the file ID system is an easily understood five-character basic identifier. The fi

® HARD DISK and MEMORY CARD RECORDER with ETHERNET AUDIO™ FILE SHARING OWNER’S MANUAL MODEL E-3000 SOFTWARE VERSION 1.24 June, 2013

For example, if the internal disk is partitioned into three drives (Numbers 1, 2, and 3), three drive numbers (4, 5, and 6) are available to map netw

Structure Details DIRECTORIES DigiCart/EX provides directories to organize and group audio cuts that have something in common; e.g.: spots, jingles

WAITING FOR NFS The unit has successfully determined its IP address, either using DHCP or by using a fixed address assignment. However, if this mess

26BFile Organization and Navigation • 21 typing only as much of their name as makes them unique. For example: If there is a cut named "BO

Chapter 4 Setup and Utility Menus Menu Navigation The SETUP menu defines the operational behavior of the DigiCart/EX. Setup options are displayed al

PLAY DIGITAL FORMAT • PROFESSIONAL FORMAT • CONSUMER FORMAT The DigiCart/EX can output audio on all output connectors simultaneously. The digital

Files recorded at various sample rates can be converted to a selected rate at play out. Files are not permanently converted; the sample rate convert

Options if Record Audio Source is set to DIGITAL: • AS RECEIVED • CONVERT TO 44100 • CONVERT TO 48000 • CONVERT TO 88200 • CONVERT TO 96000 •

RECORD OVERWRITE • CREATE NEW CUT • REPLACE EXISTING CUT Record Overwrite sets a default behavior for new recordings. “Create New Cut” assigns the

RECORD TIME LIMIT • NONE • 30 SEC • 1 MIN • 5 MIN • 30 MIN • 60 MIN Enhances the management of available Disk space of DigiCart/EX and accelerates

• Notices SAFETY COMPLIANCE DigiCart/EX complies with the following safety standards: • UL 60950, 3rd Edition, dated December 1, 2000, Standar

be selected in the range of 192.168.1.16 to 192.168.1.31 or 192.168.2.16 to 192.168.2.31. The factory default setting is AUTOMATIC. SET KEYBOARD TYP

SET REMOTE CONTROL • INACTIVE • ADDRESS (01-32) When set to INACTIVE, DigiCart/EX can be taken “off-line” from the remote control bus and will not

Hot Key Mapping Hot Keys assigned on one trigger device (e.g. a keyboard) also map to keys on the other available trigger devices (e.g. an RC-320).

Assigning a Hot Key on the DigiCart/EX Front Panel • Select the cut or Playlist to be assigned. • Press UTILITY. Select Assign Hot Key. The disp

• Select the first cut or Linear Playlist in a directory you wish to assign. • Go to the directory level. • Press the UTILITY button (or F1) and s

If the PLAY HOT KEYS USING parameter is set to Local Assignments, the Local Hot Keys list will always be used, regardless of the current drive. Net

COPYING A CUT USING COPY ORIGINAL Copies the current file another location. Select the recording to be copied, then select COPY ORIGINAL from the Uti

If you respond NO to both the Index and Name queries, DigiCart/EX will copy all cuts from the original directory to the destination directory, star

Select COPY EDITED from the UTILITY MENU. The procedures are the same as for copying a directory using COPY ORIGINAL with the addition of the FILE FO

To Format a Memory Card: • Select Format Disk from the Utility menu and press ENTER. • The display will prompt to select a drive for formatting,

18bcontents • i Contents OVERVIEW _________________________________________ 1 Introduction to the DigiCart Recorder What’s New in DigiCart/EX Su

38 • 27BSetup and Utility Menus DRIVE 0 Internal Memory Card Reader DRIVE 1 Internal Hard Disk DRIVE 2 Internal Hard Disk Partition (if inter

Chapter 5 Recording DigiCart/EX can record audio to a Memory Card, to its internal hard disk or to a network drive. To record to a network drive,

40 • 28BRecording WAV or DigiCart format, 24-bit recordings are WAV file format. DigiCart/EX cannot perform internal data format conversions.

Transport Controls Control of the DigiCart/EX transport may originate from the front panel, a keyboard, the GP inputs on the rear panel, or via the

42 • 28BRecording SETTING RECORD LEVELS • Using tone, set a "zero" level on the mixer or other program source. • Press the REC button

Chapter 6 Playback DigiCart/EX can play audio files in many different ways. These range from the straight-forward press of the PLAY button, to usi

Transport Controls Basic transport controls include RECORD, STOP, and PLAY. LOOP and PAUSE are also available. Playback can be initiated from the f

Playing Multiple Cuts — Follow-On Play In Follow-On Play, a second cut may be selected and queued to play while a cut is currently playing. NOTE:

46 • 29BPlayback Building a Quickstack • Press the PAUSE [BUILD LIST] button. (It will illuminate when pressed.) • Select a cut or Playlist (an

Chapter 7 Playlists A Playlist (also known as a Stack) is a list of audio cuts that can be stored on any drive on the DigiCart/EX or network. Some

ii • 18bcontents Memory Card Reader Memory Card Insertion ...14 Memory Card Removal ...

Linear Playlist A Linear Playlist is a list of items that can be played in sequence from a single PLAY command. When each item in a Playlist has bee

Compound Playlist A Compound Playlist is one that contains other Playlists; it can also contain individual Cuts. For a Linear Playlist containing

Saving a Playlist After you have built a Quickstack you may store it as a Playlist. To save a Quickstack: • Press the ENTER button before releasing

VIEWING A PLAYLIST To view the contents of the Play queue at any time, press VIEW LIST button and rotate select to see Playlist items remaining to

• Select the Playlist to be edited, then press EDIT. (Append is not affected by position within the list.) • Press ENTER and select APPEND from the

30BPlaylists • 53 CHANGE PLAYLIST TYPE Switches between Linear and Rotating Playlist (Stack) types. • Select the Playlist to be edited, then pr

Chapter 8 Audio Editing This chapter covers editing of audio files and Playlists. DigiCart/EX can make basic edits to audio files, such as Head and

HEAD Head determines the point in a recorded file where playback begins when the PLAY button is pressed. DigiCart/EX has a minimum length of two

Setting TAIL POINT to a Specific Value Allows setting the Tail point to a known value. This is accomplished without playing the audio. • Select a cu

FADE IN After you have recorded a cut, you can program a FADE IN. FADE IN always begins at the HEAD point of a cut, and cannot exceed total cut le

18bcontents • iii Set Time Display ... 29 Utility Menu Features ...

58 • 31BAudio Editing Setting FADE OUT to a Specific Value This method allows setting the Fade Out length to a known value. This is accomplishe

Chapter 9 Maintenance Your DigiCart/EX has no required adjustments. Maintenance issues relate to keeping it clean, operating at a safe temperature

Disk Maintenance Internal hard disk maintenance is limited to functions such as Format/Partition Disk, Rename, and Update Directories, which are all

RESTORING PREVIOUS VERSION DigiCart/EX stores two versions of its operating system in flash memory, the current version and the version previous to

62 • 32BMaintenance TROUBLESHOOTING MEMORY CARD OPERATION Incompatible cards may cause a considerable delay in the power up sequence. The displ

Appendix A Interface Wiring Audio Connector Wiring XLR BALANCED UNBALANCED PIN–1 GROUND (SHIELD) GROUND. PIN–2 AUDIO " + " AUDIO &qu

GPI/O (General Purpose I/O) NOTE: If your DigiCart/EX is replacing a DigiCart II, or will be connected to an older DigiCart, you should review the fo

33BInterface Wiring • 65 GPI/O Connector Pinout PIN SIGNAL 1 Play Switch Input 2 Record Switch Input 3 Stop Switch Input 4 Opto-isolator Com

66 • 33BInterface Wiring PIN SIGNAL 1 GND 2 +5 VOLTS (Not normally used) 3 GND 4 TX + (DigiCart Transmitter, wire to RX+) 5 TX – (DigiCar

Appendix B Serial Control Protocols A general description of DigiCart/EX Serial Control Interface Protocols is included in this section. DigiCart/E

iv • 18bcontents Audio Editing User Interface...54 Edit Audio Files...

68 • 34BSerial Control Protocols Peripheral Bus This section covers a general description of the Grass Valley switcher Peripheral Bus II protoco

Appendix C DigiCart History DigiCart Originally introduced at NAB in 1990. The original DigiCart recorded analog audio to hard disk or removable I

Appendix D D-Net File Transfer The D-NET capabilities of your DigiCart/EX allow you to use its digital audio interfaces for making audio data transfe

ELECTRICAL SPECIFICATION FOR D-NET TRANSFERS File transfers may be accomplished via either of two digital audio interfaces: • AES-3id-2000 (AES st

D-Net Setup A D-NET transfer is always initiated at the Source DigiCart. However, both the Source and Destination DigiCarts require setup. You can a

You may also enter a specific destination location when making a D-NET transfer. This method enables you to transfer files to the location that is

Echo Function If your D-NET network is configured in a “Daisy Chain,” or loop, and the Echo Function is ON, you will be able to relay the incoming tr

NOTE: A transfer can be canceled by pressing either the STOP or EXIT buttons. You’ll be prompted to confirm before the transfer is aborted. During

ABORTED TRANSFER If you press the EXIT or STOP buttons on the source DigiCart during a transfer, the transfer will continue to proceed while the disp

36BD-Net File Transfer • 77 D-Net Messages MESSAGE LOCATION MESSAGE MEANING SOURCE COULD NOT OPEN FILE FILE TO SEND COULD NOT BE OPENED SOURCE

18bcontents • v DigiCart... 69 DigiCart II...

Appendix E Recording Encoded Digital Data As of version 1.14 there is a specific selection in Record Data Format for 24 Bit Digital Data. This can

Appendix F Technical Specifications General Specifications INTERNAL HARD DISK (Drive data from manufacturer) Capacity 160GB Hard Disk Reliability

80 • 38BTechnical Specifications Physical Dimensions (nominal) Height 3.48" [89mm] (Standard EIA Rack, 2U High) Width 17" [432mm], e

Appendix N Networking Overview The Ethernet Audio Network is designed to allow the following capabilities: • Share, back up and restore audio reco

82 • Networking Choosing a Server The Ethernet Audio system is designed to work with standard computer hardware, Windows operating systems, and

Setting up the Network DigiCart/EX should be connected to a server through a Gigabit switch. (If a 10/100 Switch is used, it should have a Gigabit

Setting up the Ethernet Audio Server This is a brief overview, followed in the next section by detailed instructions on setting up a system with Wind

Networking • 85 As it is best practice to maintain the same names for the actual Windows folder names as the NFS share names, only use letters

Setting up Windows Server 2008 This assumes that the Windows 2008 system has been installed, authorized and updated. Note that these instructions do

If the Initial Configuration Tasks dialog below is not displayed, open it by selecting Start>Administrative Tools>Server Manager In Ini